PEACEFUL SNOWFALL

Here in Central Wisconsin, we are enjoying a very peaceful snowfall as I write this. If winter could be like this all the time -- beautiful gentle snow falling down, but only on the grass and tops of houses, not the roads -- it would be quire endurable. But, no, that's not how it goes. 

With those current conditions, I thought this would be a good card to share with you all today. 

I used the line of evergreen trees stamp, as well as the snowflake stamp, from a recent Paper Pumpkin kit. This scene is exactly what today feels like. 

A close up of the trees and snowflakes. Take note of the deep texture of that piece of the cardstock. Stamping onto a texture like that never works. If you want a textured background, stamp it FIRST, then run it through your embossing machine. Perfect every time!

Here is a share of a tutorial on how to create a card similar to this one. If you live in Hawaii, or someplace else without winter weather, poor you. Just kidding. You are fortunate! But I still send you peaceful wishes, even though you may not be able to relate to a scene such as this one.

SUPPLIES:

White cardstock

Balmy Blue cardstock

Soft Succulent ink

Balmy Blue ink

Stamps from Peaceful Christmas Paper Pumpkin

Peaceful Wishes (sentiment - retired)

Die cutting/embossing machine

Scalloped Contours dies (page 158, Annual Catalog)

Subtles Embossing Folder (unfortunately retired)

Snowflake sequins

Stampin' Dimensionals

DIRECTIONS:

Fold a 5 1/2" x 8 1/2" piece of white cardstock in half, creasing it well with a bone folder.

From white cardstock, using the die from the Scalloped Contours dies that measures 3 1/4" x 4 1/2", cut a scalloped mat. Towards the top of this piece, in Soft Succulent ink, stamp the row of evergreens from the Peaceful Christmas Paper Pumpkin kit. Follow with the snowflakes from the kit in Balmy Blue, stamping over the trees and a bit above them. Flip the stamp 180 degrees with each impression you make so it isn't a boring line of snowflakes.

In Soft Succulent ink, stamp the sentiment towards the bottom of the scalloped piece.

Emboss the finished scene with the Subtles Embossing Folder.

Add the scene to a piece of Balmy Blue cardstock that measures 4 3/4" x 3 3/4".

With Stampin' Dimensionals, add this to the card base.

Finish by adhering three snowflake sequins.

Snowy

Smiles.

WARM CHRISTMAS WISHES

 WISHING YOU ALL 

Christmas

Smiles.

JOYFUL CHRISTMAS WISHES

I love combining the beauty of music with  my cards on occasion. I was lucky enough to discover an old book filled with Christmas carol music. I know a lot of you would not approve of my actions, but, I did remove some of the music pages from the book to use in cards. Tsk tsk. 

After cutting the music to a 3 3/4" x 5" size, I stenciled snowflakes in Pacific Point ink across the musical score. I'd made a stencil using one of the pretty snowflake dies from the So Many Snowflakes dies set, and this is what I sponged through to create my stenciled look. I was careful not to overlap the snowflakes. However, I wanted them as close together as possible to fill up the musical space.

Adding a little ribbon, a few sequins and an appropriate sentiment gave me a finished look without being bulky. Also, keeping the color scheme tp only two colors, with the addition of the musical notes and markings, makes it even more effective.

I used Very Vanilla instead of white cardstock since the music itself had something of the patina of age.

A close up of the fun parts of the card:

Following is a tutorial on how to create a card similar to this.

SUPPLIES:

Very Vanilla cardstock

Pacific Point cardstock

Christmas music

Pacific Point ink

Joyful Christmas stamp set (retired)

Die cutting machine

So Many Snowflakes dies (page 165, Annual Catalog)

Tasteful Labels dies (page 166, Annual Catalog)

Stencil made from die

Sequins

Stampin' Dimensionals

Glue Dots

Blending Brush (page 129, Annual Catalog)

2 Very Vanilla ribbons

INSTRUCTIONS:

Fold a 5 1/2" x 8 1/2" piece of Very Vanilla cardstock in half, creasing it well with a bone folder.

To this, add a 4" x 5 1/4" piece of Pacific Point cardstock.

Use one of the dies from the So Many Snowflakes dies to create a stencil from a scrap of cardstock. Using this stencil, move it randomly over a 3 3/4" x 5" piece of Christmas music, sponging through the snowflake opening in Pacific Point, using a Blending Brush or stamping sponge. Continue to do this randomly all over the music without letting any of the snowflakes overlap.

Cut a piece of 3/4" Very Vanilla satin ribbon and a 3/4" piece of the Very Vanilla polka dot ribbon to about 6". Layering the polka dots over the satin, adhere this combo to the snowflaked piece about 1 3/4" down from the top, taping the ends on the back of the piece. Add this to the card base.

In Pacific Point ink, stamp the Christmas greeting onto a piece of Very Vanilla cardstock. Die cut it with one of the dies from the Tasteful Labels set. Add this over the ribbon with Stampin' Dimensionals.

Add a sequin to the center of all the available snowflakes for a little finishing bling.

What are your true feelings about defacing books in this manner? I really am curious. I am an avid book lover and yet I have no problem doing this whatsoever. What does bug me, however, is when people turn over the corners of a page instead of using a bookmark. But a book that has served its purpose I think would appreciate being loved in a new and wonderful way. Thoughts?

Snowflake

Smiles.

EMBOSS RESIST POINSETTIAS

It had been quite awhile since I'd done an emboss resist card, and, to be honest, I was hankering to do one for the Christmas season.

I grabbed this pretty retired set with large open poinsettias, figuring it would be perfect for the vision I had in my head. Starting with a piece of white cardstock that measures 4" x 5 1/4", I did one flower at a time, first of all, rubbing the area well with my good old Embossing Buddy (where would we be without these treasures?) I stamped one poinsettia in VersaMark ink, then sprinkled it with gold embossing powder, heating it with my Heat Tool. Once the first flower was done, I moved on to the next one, overlapping the first one just a bit, heat embossing the gold powder. I proceeded like this, flower by flower, until the cardstock was filled with pretty gold embossed poinsettias.

The next step is, for me, the most work. Maybe it's because of the arthritis in my hands, but when I finish a project such as this one, my hands ache for days. But, I love the results, so the ache is worth it once in awhile.This step is the sponging on of ink so the gold embossed flowers can resist the color.

I used one of the Blending Brushes to add these colors in stages: Cherry Cobbler, Mango Melody and Melon Mambo inks. I left some areas on the lighter side, while I darkened others for a nice contrast. For the centers of the flowers, I added a bit of Daffodil Delight.

I angled this shot so you could appreciate the beauty of the gold embossing. 

Isn't that a classy look? 

Heat embossing is still, after all these years, probably my favorite technique.

To finish off the card, I used another old retired die for the label, after embossing the sentiment again in gold. I punched holes in each side of the tag and added gold cord through the holes. Separating the strands for a uniform look, I adhered the cord to the back of the emboss resist piece, popping up the tag itself with a couple Stampin' Dimensionals.

The piece was finally added to a white card base.

Do you often indulge in the emboss resist technique? Do you find it beautiful and satisfying?

Irresistible

Smiles.

ORNAMENTS

With the Holidays and workshops, I have been spending a lot of time in my Creation Station. Since most of what I've been doing isn't for Creative Therapy's sake, but mostly things that I have to get done, I feel I need to throw in a little "fun" too. So, each day I was down there, I gave myself a break and made a paper ornament. 

I have from several years ago, two Stampin' Up! dies shaped like Christmas ornaments. In the past I have made Easter eggs using oval shaped dies, as well as fall pumpkins using circle dies. Those always turned out so cute, I thought, why not try some acual Christmas ornament-shaped pieces? 

I searched out Christmas-y paper I have in my stash, not necessarily just Stampin' Up! papers. Anything that fit the occasion was fodder for my madness. 

This is the first time we've had a Christmas tree in at least ten years, probably more. You see, our late kitty, Fred (who died in February), loved the ornaments a little too much. He would somehow get them down and EAT OFF THE CORDS that they hung from. So all these disabled ornament would gather under the tree, and I'd have to repair them in order to put them back on the tree, only to have Fred attack them again. I finally gave up.

Now, with him out of the picture (sob!) we have finally put up a tree once again. It is mostly lights, a few metal "icicles" and a handful of ornaments, all paper,  that I've made recently. 

In these <bad> photos, I present to you all nine of the "break time" ornaments I made in the past few weeks. 

At the end of the post, I will tell you how to make ornaments such as these. 

Once again, I apologize for the quality of the photos as our tree is in a weird location with inadequate lighting. But you get the idea.

Wow! What a stunning display, eh? I know they're not all that great, but they make me smile and feel a little happy. 

To make these wondrous ornaments, die cut or punch eight pieces. These can really be done with almost any shape, including circles or STARS! (hey! now I have to go down there again!) I love the star idea! 

Fold each of the eight pieces, with the side you want to show on the ornament on the inside of the fold, in half. I crease each folded piece with my bone folder. Basically you just glue all eight of these pieces together, back to back. It is important that, as you are gluing them together, to match up each of the edges.

Take a length of the cord you want to use as your hanger, fold it in half, and lay it flat down the center of the folded up ornament. Use a piece or two of tape to hold these cord ends in place. 

Put glue on one of the sides, and gently fold the two ends together to make a sealed unit, meeting the two edges as well as possible. 

It seems that no matter how careful I am, I am never able to exactly match up the edges. If this happens to you, do what I do. Take a paper snips and trim off the unruly edges. Then, if it still bother you, you can sponge the edges with a coordinating color of ink. 

They are really very easy to make. If not for the awful arthritis I have in my hands, I probably would just keep on making them, one right after another. But I have to stop after just one.

I hope you are having fun with your decorating, no matter which holiday you celebrate! 

Ornamental

Smiles.